استفسار عن هالمنتج GM Tahoe Yukon Escalade DVD Nav Unlock Module Gen5

السلام عليكم
عندي سؤال في احد عنده خبره في هالمنتج او يعرف احد جربه في سيارته ؟
GM Tahoe Yukon Escalade DVD Nav Unlock Module Gen5

Are your disappointed in your new GM trucks DVD and Navigation system?

Can't watch a movie from the front screen
or program the nav system while in motion?

GEN5 Latest Release Includes:

Automatic override of driving restriction for dvd, nav and factory camera operations.
Optional manual overide of all functions by pressing MUTE button 4 times.
T harness with factory male/female plugs allows for plug in operation.
Optional switches allows for manual or automative unlock of features.
Operate the DVD player on your nav screen and rear screen while vehicle is in motion.
Input addresses and program nav system while vehicle is in motion.
Direct plug and play for 2007 and 2008 Denso nav systems - no wires to cut or splice.
Extra power and ground wires - perfect for extra accessories.
Extra video input wire for extra camera or backup camera if your truck didn't come with it.
Complete detailed instructions and online videos for installation in trucks listed below.

This unit will fit:
2007/2008 Chevrolet Tahoe
2007/2008 GMC Suburban
2007/2008 GMC Yukon/Denali
2007/2008 Cadillac Escalade & EXT
2007/2008 Chevrolet Silverado
2007/2008 Chevrolet Avalanche
2007/2008 GMC Sierra

DVD Unlock Module and Wiring Only
Will not work in GM trucks before model year 2007
We only sell modules for the trucks and years listed!

You must have the factory installed
DensoTouch Screen DVD Nav system with flip down rear dvd screen
in order to use this module!!

Simple 15 Minute Installation
No Cutting - No Splicing - No Problems!
See The Installation Instructions Below
(email me for Escalade photos)

[CENTER]

LARGE VIEW
Standard screen. No front view of DVD or programming nav system while truck is in drive.

LARGE VIEW
With a puty knife, gently pry open the faceplate. It is held with steel spring clips.

LARGE VIEW
Remove faceplate and get a 7mm or 9/32 socket. Remove mount screws for radio, climate control and lower control.

LARGE VIEW
Pull components out. Wires allow for 6 to 8 inches of extension.

LARGE VIEW
View of back of radio. Remove brown and black plugs

LARGE VIEW
Program the module using the dip switches provided. Detailed instructions show which switches to move for deisred operation.

LARGE VIEW
Plug harness into truck harness. We taped new harness to old harness and fed thru slot in back of dash.

LARGE VIEW
Reinstall screws for components and reinstall faceplate.

LARGE VIEW
Here is the screen playing a movie while the gearshift is in drive.