بعد تركيب الانتيك معى الكبريتر انتبهت حق شئ ما أدري شسوي فيه
في فتحه حق هوز هواء تجي في الانتيك المهم انا يوم ركبت الكبريتر صار يجي فوق الفتحه ذي شنهو الحل وياه ؟
أنا كتبت في منتدى اجنبي و هذي الردود اللي حصلتها
[QUOTE
thats vacuum for the brake booster. but you won't get a fitting under the fuel bowl. you can plug the hole at the intake and take a t-fitting and connect the brake booster and pcv together to the rear vacuum port at the carb.
but you won't get full brake assistance...
]
yea that hole will need a plug put in it. I just check my performer with a 600 cfm holley and the hole is exposed, more room for the proper install of the brake booster vacum line.. If the car was mine I would get the manifold machined in an appropate place to hook up the vacume properly or get a vacume canister. You might be able to get a spacer for the carb that would allow you to use the factory port on the manifold. However this will change the way the intakes works in relation to the motor. sometimes spacers are not good for a motor.
later and
انا فهمت اني اسكرها لكن باقي الكلام مافهمته احد يقدر يوضح؟
